When testing your waters PH levels, the ideal and acceptable range is between 7.2 and 7.8. To keep it at this level, use testing strips, available for purchase on our website to ensure the correct level. Keep the testing trips in a sealed container avoiding any moisture affecting the strips, this can give you an incorrect reading. Testing the alkalinity of the water is also possible using the testing strips and should be maintained at a level between 80 to 120.
If the levels are outside of this range it is important to use our products to get balance back into your water to keep it in crystal clear condition. With our complete range of spas including a built in set and forget heating system and cooling jets for the warmer months, it is critical to maintain balance in the water to ensure that it is ready for use 365 days of the year.
By also regularly using our spa shock after periods of heavy use, your spa components will be protected from bacteria potentially caused by periods of neglect and imbalance in the levels of your spa water.
At Aqua Pulse Spas we have free water testing at our Slacks Creek showroom, located 30 minutes south of Brisbane, or 30 minutes from the northern end of the Gold Coast. You can also send us a small sample in a sealed, secure package, (we recommend same day courier for this). We can then test your water for you and let you know the best course of action to increase the life of your spa. Call us today (07) 3208 4625 or visit our showroom.